The 14 sizes of common roller chains can be found ranging from 25 to 240 like individuals in conformity with ANSI (American National Regular Institute), and ISO (Global Organization for Standardization).
The chains not simply meet the specifications to the minimum 
tensile power prescribed by ANSI and ISO, but they also give the top rated class good quality inside the globe which include a large fatigue strength
Ideal employs
?General use for driving and lifting equipment.
Examples
?Driving transfer units as well as other tools. For multilevel parking.
Collection of chains
For selection of a chain, see the tables of “Max. Horsepower Ratings” for standard roller chains and “Designing of Chain Transmission”. Nevertheless, only for any unique situation of low velocity and significantly less shock, “Low-speed selection” technique may also be referred to.
Regular roller chains as much as 5 strands can be found. The typical process for connecting pins and plates is rivet variety (RP).
The cotter sort (CP) is accessible for standard chains and HK chains of 80 or greater.
Sprockets
The normal roller chains is often engaged with typical sprockets with the corresponding nominal numbers. For sprockets, refer on the table of “Dimensions” for each dimension of chain.
Connecting hyperlinks and offset back links
For connecting back links and offset backlinks, refer to the table of “Dimensions” for every dimension of chain.
The connecting back links are usually R or C connecting back links through which the pins are clearance-fitted with all the connecting plate. Because clearance-fitted back links are inferior towards the base chain in Max. YC YL SERIES MOTORS allowable stress as from the case of one-pitch offset back links (OJ), “Low-speed selection” can’t be referred to. Because the Max. kilowatt ratings are decided looking at the power of connecting backlinks and OJ, the clearance-fitted connecting links and OJ is usually employed should the chains are selected according towards the “General selection”. Whenever a larger Max. allowable stress is required for your connecting hyperlink, utilize the interference-fitted connecting hyperlink (H connecting link) of a HI-PWR-S chain, and during the case of offset backlinks, use 2POJ.
