Merchandise Description

The illustration of Rear Axle

 

Suspension Design

AR115

 

 

Rated load(kg)

115000

Brake Type

Disc/Drum

Rim Length(mm)

1832

Max out Torque(Nm)

30000

Distribution Circle

ten*335

Flange Type

Basic Flange

Ratio

3.fifteen~6.17

Relevant Bus

7m Bus

Wheel Hub Kind

Bearing Device

Weight(oil provided)(kg)

690()Drum)/630(Disc)

The Thorough Drawing of Described Rear Axle

Variety: Entrance AXLEAF two.2~2.7                                                                                                   Sort: Front AXLE–AF 5.5

Software: five~7 m Mentor/Town Bus                                                                                               Software: 10~11 m Coach/City Bus

                                                                  

Kind: Front AXLE–AF 75                                                                                            Kind: REAR AXLE–AR forty

Software: Over eleven m Mentor/Metropolis Bus                                                                       Application: 5~8m Coach/Town Bus
Economic system of The Axle and Suspension

In get to increase the axle and suspension high quality, boost consumer car knowledge, lessen soon after-revenue servicing charges, fully understand from domestic and international innovative axle technologies, especially in the axle wheel edge distinctive innovation, from grease lubricated wheel edge, to oil lubricated wheel edge, and then to the maintainance free axle ans suspension wheel edge, when compared with the preceding era, there is a qualitative leap. Amongst them, there are 2 varieties of routine maintenance-totally free wheel edge: oil lubrication servicing-cost-free (generally 500,000 km routine maintenance-totally free) and integrated servicing-free of charge (namely bearing device, 5 years / 800,000 km servicing-cost-free).

Business Profile

 DUOYUAN Auto Products CO.LTD

Duoyuan car equipment, covers an region of much more than 100 acres and has above 300 personnel, such as a lot more than ninety professionals and technical personnel, more than ten senior engineers, and more than thirty intermediate engineers.

Our goal is to turn into the third get together expert automobile components provider with modern spirit and major technologies. With ongoing design and development for 16 a long time, we have cooperate with YuTong Team for a expression strategy. Current item market place quantity: In excess of four hundred,000 items of bus particular axles, in excess of 250,000 kits of bus air suspensions yearly manufacturing ability: a hundred,000 items of bus special axle and 50,000 kits of bus air suspensions. In 2018, our income exceeded RMB 1.5 billion.

At existing, our items are mainly bus-oriented, providing matching merchandise to complete ranges of designs this kind of as passenger bus, tourist bus, team bus, public transportation bus, school buses and new vitality bus Also, we are actively growing truck and other industrial automobile markets. Our merchandise are bought to more than one hundred thirty nations around the world and areas in the world such as Cuba, Venezuela, Russia, Iran and Saudi Arabia as areas of total motor vehicle.

In get to recognize a greater long term, we, by upholding the spirit of exploration, find out widely from others’ sturdy factors and absorb overseas and domestic advanced knowledge, and strive for the development of China’s automotive tools.

FAQ

Q:Are you buying and selling company or company?

A: We are manufacturing unit who have been specializing in creating and manufacturing axle and suspension for 20 years .
Q:Can your goods be tailored or modified?

A: We can design and style and produce the axl and suspension in accordance to customers’ specifications and automobile parameters .
Q: What is your phrases of payment ?
A: 100% Progress payment by T/T following signing the contract.
Q: What is your phrases of packing?
A: Generally, we put buggy axle on Picket pallets,Extend film set in wood box . Or Buyer required.
Q: How extended is your shipping and delivery time?
A: Generally it is fifteen-25 times if the items are in inventory. or it is 35-45 times if the goods are not in stock, it is in accordance to
quantity.
Q: What is your axl sample coverage?
A: We can provide the buggy axle sample if we have prepared parts in inventory, but the customers have to pay the sample value and he courier value.Please speak to with me with buggy axle.
Q. Do you test all your buggy axle ahead of shipping and delivery?
A: Sure, we have one hundred% examination just before delivery
Q: How do you make our business extended-phrase and excellent partnership?
A:1. We maintain axle and suspension a great top quality and competitive price tag to guarantee our buyers benefit
2. We respect every client as our friend and we sincerely do enterprise and make buddies with them, no make a difference exactly where they come from.

After-sales Service: 1 Year
Condition: New
Axle Number: 1
Application: Bus
Certification: ISO
Material: Steel

###

Customization:

###

Suspension Model
AR115
 
 
Rated load(kg)
115000
Brake Type
Disc/Drum
Rim Distance(mm)
1832
Max out Torque(Nm)
30000
Distribution Circle
10*335
Flange Type
Plain Flange
Ratio
3.15~6.17
Applicable Bus
7m Bus
Wheel Hub Type
Bearing Unit
Weight(oil included)(kg)
690()Drum)/630(Disc)
After-sales Service: 1 Year
Condition: New
Axle Number: 1
Application: Bus
Certification: ISO
Material: Steel

###

Customization:

###

Suspension Model
AR115
 
 
Rated load(kg)
115000
Brake Type
Disc/Drum
Rim Distance(mm)
1832
Max out Torque(Nm)
30000
Distribution Circle
10*335
Flange Type
Plain Flange
Ratio
3.15~6.17
Applicable Bus
7m Bus
Wheel Hub Type
Bearing Unit
Weight(oil included)(kg)
690()Drum)/630(Disc)

How to Identify a Faulty Drive Shaft

The most common problems associated with automotive driveshafts include clicking and rubbing noises. While driving, the noise from the driver’s seat is often noticeable. An experienced auto mechanic can easily identify whether the sound is coming from both sides or from one side. If you notice any of these signs, it’s time to send your car in for a proper diagnosis. Here’s a guide to determining if your car’s driveshaft is faulty:
air-compressor

Symptoms of Driveshaft Failure

If you’re having trouble turning your car, it’s time to check your vehicle’s driveshaft. A bad driveshaft can limit the overall control of your car, and you should fix it as soon as possible to avoid further problems. Other symptoms of a propshaft failure include strange noises from under the vehicle and difficulty shifting gears. Squeaking from under the vehicle is another sign of a faulty driveshaft.
If your driveshaft fails, your car will stop. Although the engine will still run, the wheels will not turn. You may hear strange noises from under the vehicle, but this is a rare symptom of a propshaft failure. However, you will have plenty of time to fix the problem. If you don’t hear any noise, the problem is not affecting your vehicle’s ability to move.
The most obvious signs of a driveshaft failure are dull sounds, squeaks or vibrations. If the drive shaft is unbalanced, it is likely to damage the transmission. It will require a trailer to remove it from your vehicle. Apart from that, it can also affect your car’s performance and require repairs. So if you hear these signs in your car, be sure to have it checked by a mechanic right away.

Drive shaft assembly

When designing a propshaft, the design should be based on the torque required to drive the vehicle. When this torque is too high, it can cause irreversible failure of the drive shaft. Therefore, a good drive shaft design should have a long service life. Here are some tips to help you design a good driveshaft. Some of the main components of the driveshaft are listed below.
Snap Ring: The snap ring is a removable part that secures the bearing cup assembly in the yoke cross hole. It also has a groove for locating the snap ring. Spline: A spline is a patented tubular machined element with a series of ridges that fit into the grooves of the mating piece. The bearing cup assembly consists of a shaft and end fittings.
U-joint: U-joint is required due to the angular displacement between the T-shaped housing and the pinion. This angle is especially large in raised 4x4s. The design of the U-joint must guarantee a constant rotational speed. Proper driveshaft design must account for the difference in angular velocity between the shafts. The T-bracket and output shaft are attached to the bearing caps at both ends.
air-compressor

U-joint

Your vehicle has a set of U-joints on the driveshaft. If your vehicle needs to be replaced, you can do it yourself. You will need a hammer, ratchet and socket. In order to remove the U-joint, you must first remove the bearing cup. In some cases you will need to use a hammer to remove the bearing cup, you should be careful as you don’t want to damage the drive shaft. If you cannot remove the bearing cup, you can also use a vise to press it out.
There are two types of U-joints. One is held by a yoke and the other is held by a c-clamp. A full ring is safer and ideal for vehicles that are often used off-road. In some cases, a full circle can be used to repair a c-clamp u-joint.
In addition to excessive torque, extreme loads and improper lubrication are common causes of U-joint failure. The U-joint on the driveshaft can also be damaged if the engine is modified. If you are driving a vehicle with a heavily modified engine, it is not enough to replace the OE U-joint. In this case, it is important to take the time to properly lubricate these components as needed to keep them functional.

tube yoke

QU40866 Tube Yoke is a common replacement for damaged or damaged driveshaft tubes. They are desirably made of a metallic material, such as an aluminum alloy, and include a hollow portion with a lug structure at one end. Tube yokes can be manufactured using a variety of methods, including casting and forging. A common method involves drawing solid elements and machining them into the final shape. The resulting components are less expensive to produce, especially when compared to other forms.
The tube fork has a connection point to the driveshaft tube. The lug structure provides attachment points for the gimbal. Typically, the driveshaft tube is 5 inches in diameter and the lug structure is 4 inches in diameter. The lug structure also serves as a mounting point for the drive shaft. Once installed, Tube Yoke is easy to maintain. There are two types of lug structures: one is forged tube yoke and the other is welded.
Heavy-duty series drive shafts use bearing plates to secure the yoke to the U-joint. All other dimensions are secured with external snap rings. Yokes are usually machined to accept U-bolts. For some applications, grease fittings are used. This attachment is more suitable for off-road vehicles and performance vehicles.
air-compressor

end yoke

The end yoke of the drive shaft is an integral part of the drive train. Choosing a high-quality end yoke will help ensure long-term operation and prevent premature failure. Pat’s Driveline offers a complete line of automotive end yokes for power take-offs, differentials and auxiliary equipment. They can also measure your existing parts and provide you with high quality replacements.
A U-bolt is an industrial fastener with threaded legs. When used on a driveshaft, it provides greater stability in unstable terrain. You can purchase a U-bolt kit to secure the pinion carrier to the drive shaft. U-bolts also come with lock washers and nuts. Performance cars and off-road vehicles often use this type of attachment. But before you install it, you have to make sure the yoke is machined to accept it.
End yokes can be made of aluminum or steel and are designed to provide strength. It also offers special bolt styles for various applications. CZPT’s drivetrain is also stocked with a full line of automotive flange yokes. The company also produces custom flanged yokes for many popular brands. Since the company has a comprehensive line of replacement flange yokes, it can help you transform your drivetrain from non-serviceable to serviceable.

bushing

The first step in repairing or replacing an automotive driveshaft is to replace worn or damaged bushings. These bushings are located inside the drive shaft to provide a smooth, safe ride. The shaft rotates in a rubber sleeve. If a bushing needs to be replaced, you should first check the manual for recommendations. Some of these components may also need to be replaced, such as the clutch or swingarm.

China Bus Coach Front Axles Bus Parts Rear Axle Half Shaft for Electric Motor Drive Axle     front drive shaft	 China Bus Coach Front Axles Bus Parts Rear Axle Half Shaft for Electric Motor Drive Axle     front drive shaft
editor by czh 2023-01-25