Merchandise Description

The illustration of Rear Axle

 

Suspension Design

AR115

 

 

Rated load(kg)

115000

Brake Variety

Disc/Drum

Rim Distance(mm)

1832

Max out Torque(Nm)

30000

Distribution Circle

ten*335

Flange Kind

Basic Flange

Ratio

three.15~6.seventeen

Relevant Bus

7m Bus

Wheel Hub Sort

Bearing Unit

Weight(oil included)(kg)

690()Drum)/630(Disc)

The Comprehensive Drawing of Defined Rear Axle

Sort: Front AXLEAF two.2~2.7                                                                                                   Sort: Front AXLE–AF 5.five

Software: 5~7 m Coach/Town Bus                                                                                               Application: ten~eleven m Coach/Town Bus

                                                                  

Kind: Entrance AXLE–AF 75                                                                                            Kind: REAR AXLE–AR forty

Software: In excess of eleven m Mentor/City Bus                                                                       Software: 5~8m Mentor/Metropolis Bus
Financial system of The Axle and Suspension

In buy to enhance the axle and suspension high quality, enhance buyer automobile encounter, reduce following-product sales routine maintenance charges, entirely find out from domestic and overseas advanced axle technology, especially in the axle wheel edge unique innovation, from grease lubricated wheel edge, to oil lubricated wheel edge, and then to the maintainance free of charge axle ans suspension wheel edge, in comparison with the previous era, there is a qualitative leap. Between them, there are 2 sorts of maintenance-free of charge wheel edge: oil lubrication routine maintenance-free (typically five hundred,000 km servicing-free) and built-in maintenance-free (specifically bearing unit, 5 years / 800,000 km upkeep-free of charge).

Organization Profile

 DUOYUAN Car Products CO.LTD

Duoyuan auto gear, covers an area of much more than one hundred acres and has above three hundred employees, including far more than ninety specialists and technical staff, much more than 10 senior engineers, and a lot more than thirty intermediate engineers.

Our objective is to become the 3rd party professional auto parts provider with innovative spirit and foremost technologies. With constant building and improvement for sixteen many years, we have cooperate with YuTong Group for a expression method. Recent item marketplace volume: In excess of 400,000 parts of bus specific axles, above 250,000 kits of bus air suspensions once-a-year creation capability: a hundred,000 pieces of bus special axle and 50,000 kits of bus air suspensions. In 2018, our sales exceeded RMB 1.5 billion.

At current, our goods are mainly bus-oriented, providing matching items to full ranges of types such as passenger bus, tourist bus, team bus, general public transportation bus, school buses and new energy bus Also, we are actively growing truck and other industrial automobile markets. Our goods are sold to a lot more than a hundred thirty nations around the world and regions in the planet these kinds of as Cuba, Venezuela, Russia, Iran and Saudi Arabia as components of full automobile.

In buy to understand a greater potential, we, by upholding the spirit of exploration, discover extensively from others’ robust details and take up foreign and domestic sophisticated encounter, and strive for the growth of China’s automotive products.

FAQ

Q:Are you investing firm or company?

A: We are factory who have been specializing in designing and manufacturing axle and suspension for 20 several years .
Q:Can your products be customized or modified?

A: We can layout and create the axl and suspension in accordance to customers’ needs and car parameters .
Q: What is your phrases of payment ?
A: 100% Progress payment by T/T soon after signing the deal.
Q: What is your phrases of packing?
A: Generally, we place buggy axle on Picket pallets,Extend movie set in wooden box . Or Buyer needed.
Q: How extended is your shipping time?
A: Generally it is fifteen-25 times if the goods are in stock. or it is 35-forty five days if the items are not in inventory, it is in accordance to
quantity.
Q: What is your axl sample policy?
A: We can offer the buggy axle sample if we have all set elements in inventory, but the buyers have to spend the sample price and he courier price.Remember to contact with me with buggy axle.
Q. Do you check all your buggy axle just before shipping and delivery?
A: Sure, we have a hundred% check prior to supply
Q: How do you make our enterprise lengthy-time period and excellent partnership?
A:1. We hold axle and suspension a excellent high quality and competitive price to make sure our customers reward
2. We regard each and every client as our good friend and we sincerely do enterprise and make close friends with them, no subject in which they appear from.

After-sales Service: 1 Year
Condition: New
Axle Number: 1
Application: Bus
Certification: ISO
Material: Steel

###

Customization:
Available

|


###

Suspension Model
AR115
 
 
Rated load(kg)
115000
Brake Type
Disc/Drum
Rim Distance(mm)
1832
Max out Torque(Nm)
30000
Distribution Circle
10*335
Flange Type
Plain Flange
Ratio
3.15~6.17
Applicable Bus
7m Bus
Wheel Hub Type
Bearing Unit
Weight(oil included)(kg)
690()Drum)/630(Disc)
After-sales Service: 1 Year
Condition: New
Axle Number: 1
Application: Bus
Certification: ISO
Material: Steel

###

Customization:
Available

|


###

Suspension Model
AR115
 
 
Rated load(kg)
115000
Brake Type
Disc/Drum
Rim Distance(mm)
1832
Max out Torque(Nm)
30000
Distribution Circle
10*335
Flange Type
Plain Flange
Ratio
3.15~6.17
Applicable Bus
7m Bus
Wheel Hub Type
Bearing Unit
Weight(oil included)(kg)
690()Drum)/630(Disc)

Drive shaft type

The driveshaft transfers torque from the engine to the wheels and is responsible for the smooth running of the vehicle. Its design had to compensate for differences in length and angle. It must also ensure perfect synchronization between its joints. The drive shaft should be made of high-grade materials to achieve the best balance of stiffness and elasticity. There are three main types of drive shafts. These include: end yokes, tube yokes and tapered shafts.
air-compressor

tube yoke

Tube yokes are shaft assemblies that use metallic materials as the main structural component. The yoke includes a uniform, substantially uniform wall thickness, a first end and an axially extending second end. The first diameter of the drive shaft is greater than the second diameter, and the yoke further includes a pair of opposing lugs extending from the second end. These lugs have holes at the ends for attaching the axle to the vehicle.
By retrofitting the driveshaft tube end into a tube fork with seat. This valve seat transmits torque to the driveshaft tube. The fillet weld 28 enhances the torque transfer capability of the tube yoke. The yoke is usually made of aluminum alloy or metal material. It is also used to connect the drive shaft to the yoke. Various designs are possible.
The QU40866 tube yoke is used with an external snap ring type universal joint. It has a cup diameter of 1-3/16″ and an overall width of 4½”. U-bolt kits are another option. It has threaded legs and locks to help secure the yoke to the drive shaft. Some performance cars and off-road vehicles use U-bolts. Yokes must be machined to accept U-bolts, and U-bolt kits are often the preferred accessory.
The end yoke is the mechanical part that connects the drive shaft to the stub shaft. These yokes are usually designed for specific drivetrain components and can be customized to your needs. Pat’s drivetrain offers OEM replacement and custom flanged yokes.
If your tractor uses PTO components, the cross and bearing kit is the perfect tool to make the connection. Additionally, cross and bearing kits help you match the correct yoke to the shaft. When choosing a yoke, be sure to measure the outside diameter of the U-joint cap and the inside diameter of the yoke ears. After taking the measurements, consult the cross and bearing identification drawings to make sure they match.
While tube yokes are usually easy to replace, the best results come from a qualified machine shop. Dedicated driveshaft specialists can assemble and balance finished driveshafts. If you are unsure of a particular aspect, please refer to the TM3000 Driveshaft and Cardan Joint Service Manual for more information. You can also consult an excerpt from the TSB3510 manual for information on angle, vibration and runout.
The sliding fork is another important part of the drive shaft. It can bend over rough terrain, allowing the U-joint to keep spinning in tougher conditions. If the slip yoke fails, you will not be able to drive and will clang. You need to replace it as soon as possible to avoid any dangerous driving conditions. So if you notice any dings, be sure to check the yoke.
If you detect any vibrations, the drivetrain may need adjustment. It’s a simple process. First, rotate the driveshaft until you find the correct alignment between the tube yoke and the sliding yoke of the rear differential. If there is no noticeable vibration, you can wait for a while to resolve the problem. Keep in mind that it may be convenient to postpone repairs temporarily, but it may cause bigger problems later.
air-compressor

end yoke

If your driveshaft requires a new end yoke, CZPT has several drivetrain options. Our automotive end yoke inventory includes keyed and non-keyed options. If you need tapered or straight holes, we can also make them for you.
A U-bolt is an industrial fastener that has U-shaped threads on its legs. They are often used to join two heads back to back. These are convenient options to help keep drivetrain components in place when driving over rough terrain, and are generally compatible with a variety of models. U-bolts require a specially machined yoke to accept them, so be sure to order the correct size.
The sliding fork helps transfer power from the transfer case to the driveshaft. They slide in and out of the transfer case, allowing the u-joint to rotate. Sliding yokes or “slips” can be purchased separately. Whether you need a new one or just a few components to upgrade your driveshaft, 4 CZPT Parts will have the parts you need to repair your vehicle.
The end yoke is a necessary part of the drive shaft. It connects the drive train and the mating flange. They are also used in auxiliary power equipment. CZPT’s drivetrains are stocked with a variety of flanged yokes for OEM applications and custom builds. You can also find flanged yokes for constant velocity joints in our extensive inventory. If you don’t want to modify your existing drivetrain, we can even make a custom yoke for you.

China Integrated Front Air Suspension Bus Axle Parts Rear Half Shaft for Electric Motor Drive Axle     a line drive shaft		China Integrated Front Air Suspension Bus Axle Parts Rear Half Shaft for Electric Motor Drive Axle     a line drive shaft
editor by CX 2023-03-28