Any injury over the teeth surfaces of a sprocket diminishes the life with the conveyor chain.
With typical sprockets, significantly worn sprocket teeth had been repaired by teeth padding or even the entire sprocket was replaced. In either situation, repair was expensive and with teeth padding, accuracy was impaired. We created new sprockets with detachable teeth for independent substitute. This sprocket is highly rated by our shoppers for that dramatic cost savings in cost and time.
The teeth may be replaced by two solutions: individual tooth replacement or sectional teeth replacement.
The bolts and nuts employed for mounting the teeth on on the sprocket are spot-welded to prevent loosening.
The respective structures are illustrated around the correct.
The above photograph plus the best proper illustration show a sprocket for individual tooth substitute. Because the joint face between the replaced teeth as well as sprocket is formed in the one of a kind arc, the bonding accuracy is high plus the sprocket power is enhanced. Furthermore, since the load acting over the mounting bolts is decreased, there may be less probability of loosening. This sprocket construction is patented.
There are actually two varieties of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are made use of for huge sprockets getting heavy loads and welded sheet steel hubs for other applications.