For Use at Low-temperature
When working with conveyor chains at low-temperature such as in a fridge or within a cold atmosphere, the following ailments may perhaps arise.
1) Reduced temperature brittleness
Generally, a material is embrittled at low-temperature and shock resistance is lowered. This phenomenon is known as low-temperature brittleness, and the degree of embrittlement differs from material to material.
The services limit of a conveyor chain is determined by its specifications.
2)Influence of freezing
At low-temperature, bending failure, roller rotation failure, fixing of chain, and so on. might be induced through the freezing of penetrated water or deposited frost inside the clearance between pins and bushings, bushings and rollers or inner plates and outer plates. These problems result in an overload to act around the chain and drive, diminishing the lifestyle on the chain.
To prevent freezing, generally, it is recommended to fill the clearances by using a low-temperature lubricant ideal to the services temperature to avoid water, frost, and so on. from penetrating the 
respective portions of your chain. For lubrication, a silicon primarily based grease is advisable.
For Use at High-temperature
Chains strength is diminished by high-temperature atmosphere, direct conveying of high-temperature loads, or radiated heat, etc. The services limit at high-temperature depends not over the temperature on the support natural environment however the temperature and material in the chain physique.
Following ailments may perhaps occur when chains are employed at high-temperature:
1) High temperature brittleness and fracture by lowered hardness of heat taken care of materials
two) Brittleness induced by carbide precipitation
3) Abnormal wear by scale
4) Fatigue fracture induced by repeated thermal shock (cooling and growth)
five) Abnormal put on on account of an increase within the coefficient of friction
6) Creep fracture
seven) Fracture as a result of thermal fatigue of welded area
8) Effects triggered by thermal growth
?Stiff hyperlinks and rotation failure as a consequence of decreased clearance ?Fatigue fracture as a result of lowered fitting force
9）Lubrication failure and stiff links resulting from deterioration and carbonization of lubricating oil
Grease great in heat resistance contain people based upon silicon, graphite or molybdenum disulfide.
For use at high-temperature, high-temperature resistance bearings and stainless steel bearings are advisable.
